NTT general calibration and validation process

 

 

The Nutrient Tracking Tool (NTT) uses the Agricultural Policy Extender (APEX) model to estimate nutrient and sediment losses as well as crop yields. APEX uses a combination of site specific data (crop management information, weather, soil and slope) and regionalized environmental parameters to estimate the results produced in NTT program. Simulations are usually done for >30 years and the main function of NTT to evaluate and compare different farm-management practices in order to minimize nutrient and sediment losses while economically optimize the crop production. However, in order to ensure that parameters used in APEX for the regional NTT simulation are appropriate the following tasks within each stage are taken:

 

 

Stage 1.     To obtain a general parameterization for each state/region, a series of NTT runs simulating common crop rotations, soils and, weather patterns for the region is done and the results are compared with expected crop yield and nutrient and sediment loss values obtained from National Agriculture Statistics Service, USDA (NASS 2017) .

 

 

Stage 2.     During this stage, the field-scale measured data from various sources (e.g., local measured studies and collaborators) are used to finalize the regional APEX parameters.

 

 

Stage 3.     The final parameters obtained from stage 2 will be used to repeat the process described in stage 1. However, the various conservation practices, common to the local region, are also simulated and evaluated for all soils and weather conditions during this stage.

 

 

Stage 4.     The final results are evaluated and presented to local stakeholders (if any) and collaborators. The results of the parameterization (for all stages) would be available on the NTT site.

 

 

 

 

STATE: Ohio

 

Below are the results for Indiana statewide simulations of APEX using the parameters derived through a regional parameterization method (Stage 1). We display the average nutrient, sediment and water quantity results over all simulations.

 

Stage: 1

                                     

Type of parameterization: Regional only (no field-scale data available at this time)

Number of counties: ALL (88)

Number of Soils: 750

Slope: 0-10%

Tile drain depth (for poorly drained soils only): 3.28 ft. (1 m)

Simulation Period: 1981-2015

Number of Scenarios: 16

Scenarios:

Table 1: Crop management scenarios

Rotation

Tillage Operation

Nutrient management

Corn-Soy

Low till and High till

Commercial and Manure*

Corn-Soy-Wheat**

Wheat

 *refer to table 2; ** wheat as cover crop

 

Table 2. Fertilizer Application

 

Manure (beef) & Commercial

Commercial Only

Manure (dry basis) (tons/ac)

Supplemental Commercial N (lb/ac)

N (lb/ac)

P (lb/ac)

Corn

2.5

125

200

45

Soy

2

 

 

45

Wheat

1.2

45

100

20

 

 

Summary of Results:

 

The results below are averaged over the 35 years simulation period.

A.   Crop Yield:

Table 3. Average crop yield for all crop management scenarios

 

Corn (bu/ac)

Soybean (bu/ac)

Wheat (bu/ac)

NTT

156

60

55

NASS*

132

41

59

*National Agriculture Statistics Service, USDA

 

 

B.   Water Quantity:

 

B.1. Tile System

Table 4. Annual average hydrologic components for each crop rotation

Rotation

Precipitation (in)

Evapotranspiration (in)

Surface Flow (in)

Drain flow (in)

Corn-Soy

39.2

19.7

5.9

12.3

Corn-Soy-Wheat

39.2

20.3

5.1

12.4

Wheat

39.2

14.7

8.9

13.7

 

 

 

Table 5. Annual average hydrologic components for all crop management scenarios

 

Precipitation (in)

Evapotranspiration (in)

Surface Flow (in)

Drain flow (in)

39.2

(34.1 – 46.5)*

18.8

(12.4 – 24.3)*

6.2

 (1.1 – 13.8)*

12.7

(7.8-20.8)*

*Range

 

 

B.2. No Tile System

Table 6. Annual average hydrologic components for each crop rotation

Rotation

Precipitation (in)

Evapotranspiration (in)

Surface Flow (in)

Corn-Soy

39.9

19.7

15.1

Corn-Soy-Wheat

39.9

20.5

14.2

Wheat

39.9

14.9

19.1

 

 

Table 7. Annual average hydrologic components for all crop management scenarios

 

Precipitation (in)

Evapotranspiration (in)

Surface Flow (in)

39.9

(34.1 – 46.5)*

18.9

(12.6– 25.2)*

15.6

 (9.9– 25.4)*

*Range

 

 

C.   Water Quality:

 

C.1. Tile System

Table 8. Annual average nutrient and sediment loads for all crop management scenarios

Surface N (lb/ac)

Tile N (lb/ac)

Surface P

(lb/ac)

Tile P (lb/ac)

Sediment (tons/ac)

19.6

(0.73 – 136.0)*

20.5

(1.04-103.5)

1.18

(0.078– 16.6)*

0.18

(0.01-0.35)

0.37

(0.003 – 7.5)*

*Range

 

Table 9. Annual average nutrient and sediment loads for each crop rotation

Rotation

Surface N (lb/ac)

Tile N (lb/ac)

Surface P

(lb/ac)

Tile P (lb/ac)

Sediment (tons/ac)

Corn-Soy

33.2

18.3

1.61

0.18

0.4

Corn-Soy-Wheat

14.3

15.0

1.01

0.18

0.2

Wheat

16.6

33.7

1.09

0.19

0.6

 

Table 10. Nutrient and sediment loads from commercial fertilizer application

Rotation

Surface N (lb/ac)

Tile N (lb/ac)

Surface P

(lb/ac)

Tile P (lb/ac)

Sediment (tons/ac)

Corn-Soy

10.2

13.8

1.04

0.19

0.30

Corn-Soy-Wheat

7.0

9.8

0.81

0.19

0.21

Wheat

14.3

31.4

0.98

0.19

0.58

 

 Table 11. Nutrient and sediment loads from manure application

Rotation

Surface N (lb/ac)

Tile N (lb/ac)

Surface P

(lb/ac)

Tile P (lb/ac)

Sediment (tons/ac)

Corn-Soy

56.1

22.8

2.17

0.17

0.58

Corn-Soy-Wheat

21.6

20.3

1.21

0.18

0.25

Wheat

18.9

36.0

1.20

0.19

0.56

 

 

C.2. No Tile System

 

Table 12. Annual average nutrient and sediment loads for all crop management scenarios

Surface N (lb/ac)

Surface P

(lb/ac)

Sediment (tons/ac)

26.8

(1.3– 150.7)*

2.0

(0.12 –13.8)*

1.1

(0.005 – 10.4)*

*Range

 

Table 13. Annual average nutrient and sediment loads for each crop rotation

Rotation

Surface N (lb/ac)

Surface P

(lb/ac)

Sediment (tons/ac)

Corn-Soy

41.5

2.74

1.28

Corn-Soy-Wheat

20.1

1.66

0.67

Wheat

25.4

1.93

1.80

 

 

 

Table 14. Nutrient and sediment loads from commercial fertilizer application

Rotation

Surface N (lb/ac)

Surface P

(lb/ac)

Sediment (tons/ac)

Corn-Soy

14.8

1.63

0.85

Corn-Soy-Wheat

10.7

1.30

0.63

Wheat

21.2

1.71

1.85

 

 Table 15. Nutrient and sediment loads from manure application

Rotation

Surface N (lb/ac)

Surface P

(lb/ac)

Sediment (tons/ac)

Corn-Soy

68.2

3.84

1.71

Corn-Soy-Wheat

29.5

2.02

0.70

Wheat

29.5

2.14

1.74